Related Experiment Video
Updated: Aug 20, 2026

Fabrication of VB2/Air Cells for Electrochemical Testing
Published on: August 4, 2013
V5+ degradation of sulfonated Radel membranes for vanadium redox flow batteries
Dongyang Chen1, Michael A Hickner
1Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802, USA.
Abstract:
Insight into the degradation mechanisms of aromatic proton conducting membrane separators for vanadium redox flow batteries (VRFBs) is urgently needed for the development of long lifetime VRFBs. Other than in-cell observations of performance degradation, there is little fundamental evidence on the specific degradation pathways of aromatic ion exchange membranes for VRFBs. Herein we investigated a sulfonated Radel® membrane (S-Radel) as the degradation target to study the degradation mechanism of aromatic polymers by V(V) (or generally V(5+)) oxidation. It was found that the ductile S-Radel membrane, which has a similar aromatic backbone structure to the most-studied polyaromatic VRFB membranes that have shown high performance, became brittle and discolored after 3 days of immersion in 1.7 M V(V) + 3.3 M H2SO4 solution at 40 °C. The membrane's intrinsic viscosity was reduced to about half of its original value after this exposure to V(V) while the ion exchange capacity did not change. In addition to chain scission, it was found that -OH groups were introduced to the backbone of S-Radel as the major degradation product. Quinone groups were also observed at 1677 cm(-1) in FTIR measurements. While the V(V) species in VRFBs is usually denoted as VO2(+), V(V)=O in VOCl3 was found to not have degradation activity for S-Radel. Therefore, we hypothesized that there were other reactive forms of V(V) species that first attacked the S-Radel by incorporating hydroxyl groups into the polymer's aromatic backbone, followed by the oxidation of these hydroxyl groups to quinone functionalities through a redox mechanism.
Related Concept Videos
Voltaic/Galvanic Cells
Spontaneous redox reactions occur abundantly in nature. The chemical reaction occurring in a disposable AA battery powering our remote controls is one such example of a spontaneous redox reaction. Another example is the immersion of coiled copper wire into an aqueous silver nitrate solution. The reaction shows a gradual, visually impressive color change from colorless to bright blue and the formation of a grey precipitate on the copper wire. In this experiment,...
Batteries and Fuel Cells
Ladder Diagrams: Redox Equilibria
Consider the Fe3+/Fe2+ half-reaction, which has a standard-state potential of +0.771 V. At potentials more positive than +0.771 V, Fe3+ predominates, whereas Fe2+...
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...

