Related Experiment Video
Updated: May 10, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Stabilization of heavy metals in lightweight aggregate made from sewage sludge and river sediment
Guoren Xu1, Mingwei Liu, Guibai Li
1State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin, 150090, China. xgr@hit.edu.cn
Abstract:
The primary goal of this research is to investigate the stabilization of heavy metals in lightweight aggregate (LWA) made from sewage sludge and river sediment. The effects of the sintering temperature, the (Fe₂O₃+CaO+MgO)/(SiO₂+Al₂O₃) ratio (K ratio), SiO₂/Al₂O₃ and Fe₂O₃/CaO/MgO (at fixed K ratio), pH, and oxidative conditions on the stabilization of heavy metals were studied. Sintering at temperatures above 1100 °C effectively binds Cd, Cr, Cu and Pb in the LWA, because the stable forms of the heavy metals are strongly bound to the aluminosilicate or silicate frameworks. Minimum leachabilities of Cd, Cr, Cu and Pb were obtained at K ratios between 0.175 and 0.2. When the LWA was subjected to rigorous leaching conditions, the heavy metals remained in the solid even when the LWA bulk structure was broken. LWA made with sewage sludge and river sediment can therefore be used as an environmentally safe material for civil engineering and other construction applications.
More Related Videos
05:52Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
15:19Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Related Concept Videos
Microbial Bioremediation of Uranium
Deleterious Substances in Aggregate
Another type of impurity is clay and fine material that...
Coagulation
Microbial Leaching
Factors Affecting Solubility
Acid Mine Drainage