Comparison of local thrombolytic efficacy of plasmin and rt-PA in an in-vitro flow system; a pilot study

Plasmin, a directly acting thrombolytic agent, demonstrated a very favorable safety profile upon intra-arterial delivery to the clot site; however, its thrombolytic efficacy remains to be further assessed. In this study, differences in thrombolysis between clots exposed to equimolar concentrations of plasmin and recombinant tissue-type plasminogen activator (rt-PA) after partial vessel recanalization were tested in a model system. Model blood clots were prepared in glass chambers enabling direct observation by dynamic optical microscopy. The incubation of clots with plasmin (2.4 mg/ml) or rt-PA (2.63 mg/ml), allowing for the initial biochemical clot degradation, was followed by 'flushing' the clots with tangentially directed plasma flow devoid of a thrombolytic agent, mimicking blood flow after partial vessel recanalization. The acquired images were analyzed for nondissolved blood clot area as a function of time. With both thrombolytic agents, the relative clot area decreased rapidly in the first 30 s after initiation of perfusion due to 'flushing' the degraded clot fragments (after plasmin by 0.26 ± 0.22 and after rt-PA by 0.34 ± 0.21, P = 0.60). In the following minutes, the clot size showed a linear time dependence: after incubation with plasmin the clot size did not change substantially any more, whereas after incubation with rt-PA the clot size continually decreased. The slopes of the regression lines differed significantly (r(pl) = -8.9 10 vs. r(rtPA) = -44.1 10/min, P < 0.01). In conclusion, the thrombolytic action of plasmin was terminated rapidly by contact with flowing blood plasma, whereas the thrombolytic action of rt-PA was prolonged.