Removal of COD and colour in real pharmaceutical wastewater by photoelectrocatalytic oxidation method
Tao Fang1, Lixia Liao, Xiangju Xu
1Department of Chemistry and Chemical Engineering, College of Science, Northeast Forestry University, Harbin 150040, China.
Abstract:
In this study, TiO2/Ni photo-anode and multi-walled carbon nano-tubes (MWCNTs) air cathode were prepared by the dip-coating method, and the photoelectrocatalytic degradation of real pharmaceutical wastewater was investigated in the self-made reactor. The combination of the TiO2/Ni electrode and MWCNTs air cathode was adopted to treat the pharmaceutical wastewater by the process of photoelectrocatalysis. Various operational parameters to achieve optimum efficiency of this photoelectrocatalytic degradation system are presented, such as applied bias voltage, NaCl concentration, pH and different degradation methods. Under the optimal conditions, the removal of chemical oxygen demand (COD) and colour are 93.5% and 78.5% respectively. The possible roles of the anode-cathode on the reactions and the probable mechanisms of effect were also discussed. The photoelectrocatalytic technology can be used for the long-term treatment of real pharmaceutical wastewater.
More Related Videos
08:30A Complete Method for Evaluating the Performance of Photocatalysts for the Degradation of Antibiotics in Environmental Remediation
Published on: October 6, 2022
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
Related Concept Videos
Bioremediation
Coagulation
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Factors Affecting Solubility
Microbial Bioremediation of Hydrocarbons
Microbial Leaching
