Related Experiment Video
Updated: May 9, 2026

Monolayer Contact Doping of Silicon Surfaces and Nanowires Using Organophosphorus Compounds
Published on: December 2, 2013
Reducing leakage currents in n-channel organic field-effect transistors using molecular dipole monolayers on
Josué F Martínez Hardigree1, Thomas J Dawidczyk, Robert M Ireland
1Department of Materials Science and Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218, United States.
Abstract:
Leakage currents through the gate dielectric of thin film transistors remain a roadblock to the fabrication of organic field-effect transistors (OFETs) on ultrathin dielectrics. We report the first investigation of a self-assembled monolayer (SAM) dipole as an electrostatic barrier to reduce leakage currents in n-channel OFETs fabricated on a minimal, leaky ∼10 nm SiO2 dielectric on highly doped Si. The electric field associated with 1H,1H,2H,2H-perfluoro-octyltriethoxysilane (FOTS) and octyltriethoxysilane (OTS) dipolar chains affixed to the oxide surface of n-Si gave an order of magnitude decrease in gate leakage current and subthreshold leakage and a two order-of-magnitude increase in ON/OFF ratio for a naphthalenetetracarboxylic diimide (NTCDI) transistor. Identically fabricated devices on p-Si showed similarly reduced leakage and improved performance for oxides treated with the larger dipole FOTS monolayer, while OTS devices showed poorer transfer characteristics than those on bare oxide. Comparison of OFETs on both substrates revealed that relative device performance from OTS and FOTS treatments was dictated primarily by the organosilane chain and not the underlying siloxane-substrate bond. This conclusion is supported by the similar threshold voltages (VT) extrapolated for SAM-treated devices, which display positive relative VT shifts for FOTS on either substrate but opposite VT shifts for OTS treatment on n-Si and p-Si. Our results highlight the potential of dipolar SAMs as performance-enhancing layers for marginal quality dielectrics, broadening the material spectrum for low power, ultrathin organic electronics.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...
