Related Experiment Video
Updated: May 9, 2026

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7−δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates
Published on: April 12, 2019
Electrochemical properties of Sn-substituted LiMn2O4 thin films prepared by radio-frequency magnetron sputtering
Woo Yeon Kong1, Haena Yim, Seok-Jin Yoon
1Electronic Materials Research Center, Korea Institute of Science and Technology, Seoul 136-791, South Korea.
Abstract:
The LiMn2O4 and LiSn0.0125Mn1975O4 thin films were grown on Pt/Ti/SiO2/Si (100) substrate by RF magnetron sputtering. To obtain the structural stability and good cycle performance, deposition parameters, namely working pressure, sputtering gas ratio of Ar and O2, post-annealing temperature were established. The structure and surface morphology of thin films were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The electrochemical properties were estimated by two electrode half-cell test with WBCS 3000 (Wonatech, Korea) at constant current rate of 1 C-rate. The Sn substituted LiMn2O4 thin film deposited at 10 mtorr with mixture of argon and oxygen (Ar/O2 = 3/1) and then annealed at 500 degrees C in O2 atmosphere showed good cycle performance. The Sn substituted LiMn2O4 thin films showed larger capacity of -30 microAh/microm-cm2 and higher cyclability than LiMn2O4 thin films.

