The CellSoft computerized semen analysis system: sperm image sizes and velocity measurements, and the consequences...

The CellSoft computer-assisted sperm analysis system was evaluated as to the optimal setting of three components of the internal running conditions. These 'set up' parameters were the lower setting for cell size range (PIXMIN), threshold velocity (MINVEL) and maximum velocity (MAXVEL). The decision for the PIXMIN setting was founded on observed sizes of sperm with low instant velocities combined with a study of the relationship between false positive observations for sperm and the PIXMIN setting. Our recommendation for this setting is three pixels. From the observation that 97.5% of immobilized sperm exhibit instant velocities of less than 15 microns sec-1, this is our proposal for the MINVEL setting. Correspondingly, the 97.5 percentile for instantaneous velocities in a population of some 14,000 cells (30 men with type 'a' motility, WHO) was 168 microns sec-1. We recommend that MAXVEL be set at this limit. Alternative settings for both MINVEL and MAXVEL are presented as some users may wish to apply other percentiles. From the above results a setting for PIXMAX at 25 pixels could be inferred. We recommend that these settings be applied in semen laboratories analysing human native samples at room temperature.