Related Experiment Video
Updated: May 9, 2026

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
Ammonium nitrogen removal from wastewater with a three-dimensional electrochemical oxidation system
Jing Ding1, Qing-Liang Zhao, Liang-Liang Wei
1School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin, China.
Abstract:
Ammonium-containing wastewater could cause the promotion of eutrophication and a hindrance to the disinfection of water supplies. In this study, the feasibility of removing low-concentration ammonium nitrogen from synthetic and real wastewater by electrochemical oxidation was investigated. Using laboratory-scale electrochemical systems, the effects of chloride concentration, current density, anode materials, cathode materials, electrode gap, initial ammonium concentration and three-dimensional particles on the removal of ammonium nitrogen and current efficiency (CE) were evaluated. Ammonium nitrogen removal was mainly dependent upon anode materials and current density. The performance of two- and three-dimensional electrochemical oxidation systems was comparatively discussed. Both particle electrodes could enhance ammonium nitrogen removal and increase CE. However, the mechanism of the process seemed to be different. Moreover, the interaction of zeolites adsorption and electrochemical oxidation on the anode in a three-dimensional system could favor the regeneration of zeolites. Surface morphology of the used Ru-Ir-Sn/Ti anode revealed its longer working life of electrocatalysis. The result of ammonium degradation for a real wastewater treatment plant effluent showed the degradation rates in a three-dimensional system increased by 1.4 times those in a two-dimensional system.
More Related Videos
Related Concept Videos
Metabolism of Chemolithotrophs
Inorganic Nitrogen Assimilation
Overview of Nitrogen Metabolism
The largest pool of nitrogen available in the terrestrial ecosystem is gaseous nitrogen (N2) from the air, but this nitrogen...
1° Amines to Diazonium or Aryldiazonium Salts: Diazotization with NaNO2 Mechanism
1° Amines to Diazonium or Aryldiazonium Salts: Diazotization with NaNO2 Overview
The nitrous acid is unstable. Hence, it is formed in situ from a solution of sodium nitrite and cold aqueous acids such as hydrochloric or sulfuric acid. In an acidic solution, the –OH group of nitrous acid undergoes protonation to give oxonium ion, followed by water loss...
Preparation of Amines: Alkylation of Ammonia and Amines
Each alkylation step makes the nitrogen center more nucleophilic, which triggers successive alkylations until a quaternary ammonium salt is formed. Considering...

