Related Experiment Video
Updated: May 8, 2026

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
Published on: November 30, 2012
Asymmetric design of photonic crystal surface-emitting lasers with low-threshold characteristics
Chih-Tsang Hung1, Tsung-Lin Ho, Tien-Chang Lu
1Department of Photonics and Institute of Electro-Optical Engineering, National Chiao Tung University, Hsinchu, Taiwan.
Abstract:
We present AlGaAs-InGaAs multiquantum wells photonic crystal surface-emitting lasers by using the transfer matrix method and coupled wave method to achieve a low-threshold operation. The extremely low-threshold gain is achieved by adopting an asymmetric cladding layer design to enhance both of the vertical optical confinement factors for the quantum wells and photonic crystal (PC). By modifying the composition of the AlGaAs layer to raise the refractive index in the p-type cladding, optical field distribution will obviously be shifted to the p side. Hence, it results in a significant coupling enhancement between the optical mode profile and the PC layer. The optimized value of the vertically optical confinement factor of the PC layer is 13.94%, and the corresponding threshold gain can be as low as 19.45 cm(-1).
More Related Videos
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
10:54Design, Fabrication, and Experimental Characterization of Plasmonic Photoconductive Terahertz Emitters
Published on: July 8, 2013