Probing timescales during back side ablation of Molybdenum thin films with optical and electrical measurement...

In this study we present a new measurement technique to investigate the timescales of back side ablation of conductive films, using Molybdenum as an application example from photovoltaics. With ultrashort laser pulses at fluences below 0.6 J/cm(2), we ablate the Mo film in the shape of a fully intact Mo 'disc' from a transparent substrate. By monitoring the time-dependent current flow across a specifically developed test structure, we determine the time required for the lift-off of the disc. This value decreases with increasing laser fluence down to a minimum of 21 ± 2 ns. Furthermore, we record trajectories of the discs using a shadowgraphic setup. Ablated discs escape with a maximum velocity of 150 ± 5 m/s whereas droplets of Mo forming at the center of the disc can reach velocities up to 710 ± 11 m/s.