Related Experiment Video
Updated: May 8, 2026

Fabrication of Ti3C2 MXene Microelectrode Arrays for In Vivo Neural Recording
Published on: February 12, 2020
Carbon-nanotube-modified electrodes for highly efficient acute neural recording
Jung Hwal Shin1, Guk Bae Kim, Eun Joo Lee
1Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 790-784, Republic of Korea.
Abstract:
Microelectrodes are widely used for monitoring neural activities in various neurobiological studies. The size of the neural electrode is an important factor in determining the signal-to-noise ratio (SNR) of recorded neural signals and, thereby, the recording sensitivity. Here, it is demonstrated that commercial tungsten microelectrodes can be modified with carbon nanotubes (CNTs), resulting in a highly sensitive recording ability. The impedance with the respect to surface area of the CNT-modified electrodes (CNEs) is much less than that of tungsten microelectrodes because of their large electrochemical surface area (ESA). In addition, the noise level of neural signals recorded by CNEs is significantly less. Thus, the SNR is greater than that obtained using tungsten microelectrodes. Importantly, when applied in a mouse brain in vivo, the CNEs can detect action potentials five times more efficiently than tungsten microelectrodes. This technique provides a significant advance in the recording of neural signals, especially in brain regions with sparse neuronal densities.

