Related Experiment Video
Updated: May 8, 2026

Watershed Planning within a Quantitative Scenario Analysis Framework
Published on: July 24, 2016
Quantifying the hydrological impact of simulated changes in land use on peak discharge in a small catchment
Zahra Kalantari1, Steve W Lyon, Lennart Folkeson
1Department of Land and Water Resources Engineering, Royal Institute of Technology, SE-100 44 Stockholm, Sweden.
Abstract:
A physically-based, distributed hydrological model (MIKE SHE) was used to quantify overland runoff in response to four extreme rain events and four types of simulated land use measure in a catchment in Norway. The current land use in the catchment comprises arable lands, forest, urban areas and a stream that passes under a motorway at the catchment outlet. This model simulation study demonstrates how the composition and configuration of land use measures affect discharge at the catchment outlet differently in response to storms of different sizes. For example, clear-cutting on 30% of the catchment area produced a 60% increase in peak discharge and a 10% increase in total runoff resulting from a 50-year storm event in summer, but the effects on peak discharge were less pronounced during smaller storms. Reforestation of 60% of the catchment area was the most effective measure in reducing peak flows for smaller (2-, 5- and 10-year) storms. Introducing grassed waterways reduced water velocity in the stream and resulted in a 28% reduction in peak flow at the catchment outlet for the 50-year storm event. Overall, the results indicate that the specific effect of land use measures on catchment discharge depends on their spatial distribution and on the size and timing of storm events.
Related Concept Videos
Design Example: Creating a Hydraulic Model of a Dam Spillway
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Net Change Theorem
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Typical Model Studies
Design Example: Design of an Irrigation Channel

