Oxygen transport in nanostructured lanthanum manganites

Methods and models describing oxygen diffusion and desorption in oxides have been developed for slightly defective and well crystallised bulky materials. Does nanostructuring change the mechanism of oxygen mobility? In such a case, models should be properly checked and adapted to take into account new material properties. In order to do so, temperature programmed oxygen desorption and thermogravimetric analysis, either in isothermal or ramp mode, have been used to investigate some nanostructured La1-xAxMnO3±δ samples (A = Sr and Ce, 20-60 nm particle size) with perovskite-like structure. The experimental data have been elaborated by means of different models to define a set of kinetic parameters able to describe oxygen release properties and oxygen diffusion through the bulk. Different rate-determining steps have been identified, depending on the temperature range and oxygen depletion of the material. In particular, oxygen diffusion was shown to be rate-limiting at low temperature and at low defect concentration, whereas oxygen recombination at the surface seems to be the rate-controlling step at high temperature. However, the oxygen recombination step is characterised by an activation energy much lower than that for diffusion. In the present paper oxygen transport in nanosized materials is quantified by making use of widely diffused experimental techniques and by critically adapting to nanoparticles suitably chosen models developed for bulk materials.