Related Experiment Video
Updated: May 7, 2026

Design of Solid-State Fermentation Systems for Polymer Hydrolytic Extracellular Enzyme Production by Filamentous Fungi
Published on: June 6, 2025
Endoglucanase production with the newly isolated Myceliophtora sp. i-1d3b in a packed bed solid state fermentor
A I Zanelato1, V M Shiota, E Gomes
1Departamento de Engenharia e Tecnologia de Alimentos, Instituto de Biociências, Letras e Ciências Exatas, Universidade Estadual Paulista , São José do Rio Preto, SP , Brasil.
Abstract:
This work is aimed to produce endoglucanase through solid state fermentation in a packed bed bioreactor with the use of the fungus Myceliophtora sp. I-1D3b using a mixture of wheat bran (WB) and sugar cane bagasse (SCB) as culture medium. Preliminary tests were performed in polypropylene plastic bags, controlling the variables temperature (40, 45, and 50°C), initial moisture content (75, 80, and 85%, w.b.), and weight proportion SCB/WB (1:1, 7:3, and 9:1). The highest enzyme activities in plastic bags were obtained using the substrate proportion of 7:3, 50°C temperature, and 80% initial moisture content (878 U/grams of dry solid). High activities of filter-paper cellulase and xylanase were also obtained in plastic bags and some results are reported. For the packed bed experiments, the temperature (45 and 50°C) and the air flow rate (80, 100 and 120L/h) were the controlled variables. Activity of endoglucanase was similar to plastic bag tests. A longitudinal gradient of moisture content, was observed increasing from the bottom to the top of the reactor, even though the longitudinal enzyme activity profile was flat for almost the whole bed. Air flow rate did not affect enzyme activity, while experiments carried out at 50°C showed higher enzyme activities. The maximum temperature peak observed was at about 6°C above the process temperature.
Related Concept Videos
Production of Biopesticides
Production of Antibiotics
Production of Pharmaceuticals
Bioreactor Controls-III
Production of Organic Acids
