Related Experiment Video
Updated: May 7, 2026

Synthesis and Functionalization of 3D Nano-graphene Materials: Graphene Aerogels and Graphene Macro Assemblies
Published on: November 5, 2015
Synthesis, characterization and electrochemical performance of graphene decorated with 1D NiMoO4 · nH2O nanorods
Debasis Ghosh1, Soumen Giri, Chapal Kumar Das
1Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur 721302, India. chapal12@yahoo.co.in.
Abstract:
One-dimensional NiMoO4 · nH2O nanorods and their graphene based hybrid composite with good electrochemical properties have been synthesized by a cost effective hydrothermal procedure. The formation of the mixed metal oxide and the composite was confirmed by XRD, XPS and Raman analyses. The morphological characterizations were carried out using FESEM and TEM analyses. The materials were subjected to electrochemical characterization through cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS) studies with 6 M KOH as the supporting electrolyte. For NiMoO4 · nH2O, a maximum specific capacitance of 161 F g(-1) was obtained at 5 A g(-1) current density, accompanied with an energy density of 4.53 W h kg(-1) at a steady power delivery rate of 1125 W kg(-1). The high utility of the pseudocapacitive NiMoO4 · nH2O was achieved in its graphene based composite, which exhibited a high specific capacitance of 367 F g(-1) at 5 A g(-1) current density and a high energy density of 10.32 W h kg(-1) at a power density of 1125 W kg(-1) accompanied with long term cyclic stability.

