Related Experiment Video

Updated: May 7, 2026

Core/shell Printing Scaffolds For Tissue Engineering Of Tubular Structures
05:52

Core/shell Printing Scaffolds For Tissue Engineering Of Tubular Structures

Published on: September 27, 2019

Development of a new direct core build-up method using a hollow fiber-reinforced post

Yoji Inaba1, Fumio Teraoka, Masafumi Nakagawa

  • 1Division of Biomaterials Science, Graduate School of Dentistry, Osaka University.

Dental Materials Journal
|October 4, 2013
PubMed

More Related Videos

Designing a Bioreactor to Improve Data Acquisition and Model Throughput of Engineered Cardiac Tissues12:28

Designing a Bioreactor to Improve Data Acquisition and Model Throughput of Engineered Cardiac Tissues

Published on: June 2, 2023

Integrated Bone Formation Through In Vivo Endochondral Ossification Using Mesenchymal Stem Cells06:05

Integrated Bone Formation Through In Vivo Endochondral Ossification Using Mesenchymal Stem Cells

Published on: July 14, 2023

Related Concept Videos

Fiber Reinforced Concrete01:22

Fiber Reinforced Concrete

Fiber-reinforced concrete significantly enhances the structural and nonstructural properties of traditional concrete by incorporating fibers like steel, glass, and polymers. These fibers, varying from natural ones such as sisal and cellulose to manufactured ones like polypropylene and Kevlar, are mixed into hydraulic cement with aggregates. Steel fibers, often preferred for their robustness, contribute to improved ductility, toughness, and post-cracking performance. The concrete is classified...
Accelerated Curing of Concrete01:25

Accelerated Curing of Concrete

Accelerating concrete curing is achieved by applying heat and additional moisture. This process accelerates the hydration of the cement, resulting in an earlier strength gain in the concrete. Steam curing is a method wherein the concrete products are either transported through a chamber on a conveyor belt or encased in plastic, allowing steam at atmospheric pressure to circulate freely around them. This process begins with a phase of moist curing that typically lasts between 3 to 5 hours, after...
Posttensioned Masonry Walls01:15

Posttensioned Masonry Walls


Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...
Pumped Concrete01:13

Pumped Concrete

Concrete in large quantities can be pumped across long distances for placing in inaccessible sites. This system comprises a hopper that receives concrete from a mixer, a pump to propel the concrete, and pipelines that facilitate its delivery.
For direct-acting pumps, the concrete enters the pump via the inlet valve under the action of gravity and suction created by the movement of the piston. This concrete is then forced into the pipeline and out through the outlet valve by the forward movement...