Development of a numerical simulator of human swallowing using a particle method (Part 2. Evaluation of the accuracy...

The aim of this study was to develop and evaluate the accuracy of a three-dimensional (3D) numerical simulator of the swallowing action using the 3D moving particle simulation (MPS) method, which can simulate splashes and rapid changes in the free surfaces of food materials. The 3D numerical simulator of the swallowing action using the MPS method was developed based on accurate organ models, which contains forced transformation by elapsed time. The validity of the simulation results were evaluated qualitatively based on comparisons with videofluorography (VF) images. To evaluate the validity of the simulation results quantitatively, the normalized brightness around the vallecula was used as the evaluation parameter. The positions and configurations of the food bolus during each time step were compared in the simulated and VF images. The simulation results corresponded to the VF images during each time step in the visual evaluations, which suggested that the simulation was qualitatively correct. The normalized brightness of the simulated and VF images corresponded exactly at all time steps. This showed that the simulation results, which contained information on changes in the organs and the food bolus, were numerically correct. Based on these results, the accuracy of this simulator was high and it could be used to study the mechanism of disorders that cause dysphasia. This simulator also calculated the shear rate at a specific point and the timing with Newtonian and non-Newtonian fluids. We think that the information provided by this simulator could be useful for development of food products, medicines, and in rehabilitation facilities.