An experimental and modeling study of the low- and high-temperature oxidation of cyclohexane

The experimental study of the oxidation of cyclohexane has been performed in a jet-stirred reactor at temperatures ranging from 500 to 1100 K (low- and intermediate temperature zones including the negative temperature-coefficient area), at a residence time of 2 s and for dilute mixtures with equivalence ratios of 0.5, 1, and 2. Experiments were carried out at quasi-atmospheric pressure (1.07 bar). The fuel and reaction product mole fractions were measured using online gas chromatography. A total of 34 reaction products have been detected and quantified in this study. Typical reaction products formed in the low-temperature oxidation of cyclohexane include cyclic ethers (1,2-epoxycyclohexane and 1,4-epoxycyclohexane), 5-hexenal (formed from the rapid decomposition of 1,3-epoxycyclohexane), cyclohexanone, and cyclohexene, as well as benzene and phenol. Cyclohexane displays high low-temperature reactivity with well-marked negative temperature-coefficient (NTC) behavior at equivalence ratios 0.5 and 1. The fuel-rich system (ϕ = 2) is much less reactive in the same region and exhibits no NTC. To the best of our knowledge, this is the first jet-stirred reactor study to report NTC in cyclohexane oxidation. Laminar burning velocities were also measured by the heated burner method at initial gas temperatures of 298, 358, and 398 K and at 1 atm. The laminar burning velocity values peak at ϕ = 1.1 and are measured as 40 and 63.1 cm/s for T_i = 298 and 398 K, respectively. An updated detailed chemical kinetic model including low-temperature pathways was used to simulate the present (jet-stirred reactor and laminar burning velocity) and literature experimental (laminar burning velocity, rapid compression machine, and shock tube ignition delay times) data. Reasonable agreement is observed with most of the products observed in our reactor, as well as the literature experimental data considered in this paper.