Vortex beam production and contrast enhancement from a magnetic spiral phase plate

Electron vortex beam probes offer the possibility of mapping magnetic moments with atomic resolution. In this work we consider using the stray magnetic field produced from a narrow ferromagnetic rod magnetised along its long axis to produce a vortex beam probe, as an alternative to the currently used holographic apertures or gratings. We show through numerical modelling, electron holography observations and direct imaging of the electron probe, that a long narrow ferromagnetic rod induces a phase shift in the wave-function of passing electrons that approximately describes a helix in the regions near its ends. Directing this rod towards the optical axis of a charged-particle beam probe forming system at a limiting aperture position, with the free-end sufficiently close to the axis, is shown to offer a point spread function composed of vortex modes, with evidence of this appearing in observations of the electron probe formed from inserting a micro-fabricated CoFe rod into the beam path of a 300 keV transmission electron microscope (TEM). If the rod is arranged to contain the magnetic flux of h/e, thus producing a maximum phase shift of 2π, it produces a simple spiral-like phase contrast transfer function for weak phase objects. In this arrangement the ferromagnetic rod can be used as a phase plate, positioned at the objective aperture position of a TEM, yielding enhanced image contrast which is simulated to be intermediate between comparable Zernike and Hilbert phase plates. Though this aspect of the phase plate performance is not demonstrated here, agreement between our observations and models for the probe formed from an example rod containing a magnetic flux of ~2.35h/e, indicate this phase plate arrangement could be a simple means of enhancing contrast and gaining additional information from TEM imaged weak phase samples, while also offering the capability to produce vortex beam probes. However, steps still need to be taken to either remove or improve the support membrane for the rod in our experiments to reduce any effects from charging in the phase plate.