Pyrolucite fluidized-bed reactor (PFBR): a robust and compact process for removing manganese from groundwater

The purpose of this paper is to introduce a pyrolucite fluidized-bed reactor (PFBR) as a potential drinking water process to treat groundwater containing high levels of dissolved manganese (Mn(II)) (0.5-3 mg/L) and reduce its concentration to <0.02 mg/L in treated water. A pilot-scale study was conducted under dynamic conditions using synthetic groundwater (SGW), to elucidate the effect of operational conditions and groundwater composition on manganese (Mn) removal achieved by the PFBR. Results demonstrated almost complete Mn removal (close to 100%) in less than 1 min under all tested operational conditions (influent Mn concentration of 0.5-3 mg/L, calcium (Ca(2+)) hardness of 0-200 mg CaCO3/L, pH of 6.2-7.8, temperature of 9 & 23 °C and high hydraulic loading rate (HLR) of 24-63 m/h (i.e., bed expansion of 0-30%)). Improved Mn removal profile was achieved at higher water temperature. Also, the results showed that adsorption of Mn(II) onto pyrolucite and subsequent slower surface oxidation of sorbed Mn(II) was the only mechanism responsible for Mn removal while direct oxidation of Mn(II) by free chlorine did not occur even at high concentrations of Mn(II) and free chlorine and elevated temperatures. Higher average mass transfer coefficient and consequently adsorption rate was achieved at elevated HLR. Increasing effluent free chlorine residuals from 1.0 to 2.0-2.6 mg Cl2/L allowed increasing the operation time needed for media regeneration from 6 days to >12 days. Turbidity was maintained around 0.2 NTU during the entire test periods indicating good capture of MnOx colloids within the PFBR.