Related Experiment Video
Updated: May 6, 2026

Capturing Actively Produced Microbial Volatile Organic Compounds from Human-Associated Samples with Vacuum-Assisted Sorbent Extraction
Published on: June 1, 2022
Stability of volatile sulfur compounds (VSCs) in sampling bags - impact of temperature
1UNSW Water Research Centre, School of Civil and Environmental Engineering, The University of New South Wales, Sydney, NSW 2052, Australia
Abstract:
Volatile sulfur compounds (VSCs) are a major component of odorous emissions that can cause annoyance to local populations surrounding wastewater, waste management and agricultural practices. Odour collection and storage using sample bags can result in VSC losses due to sorption and leakage. Stability within 72 hour storage of VSC samples in three sampling bag materials (Tedlar, Mylar, Nalophan) was studied at three temperatures: 5, 20, and 30 °C. The VSC samples consisted of hydrogen sulfide (H2S), methanethiol (MeSH), ethanethiol (EtSH), dimethyl sulfide (DMS), tert-butanethiol (t-BuSH), ethylmethyl sulfide (EMS), 1-butanethiol (1-BuSH), dimethyl disulfide (DMDS), diethyl disulfide (DEDS), and dimethyl trisulfide (DMTS). The results for H2S showed that higher loss trend was clearly observed (46-50% at 24 hours) at 30 °C compared to the loss at 5 °C or 20 °C (of up to 27% at 24 hours) in all three bag materials. The same phenomenon was obtained for other thiols with the relative recoveries after a 24 hour period of 76-78% at 30 °C and 80-93% at 5 and 20 °C for MeSH; 77-80% at 30 °C and 79-95% at 5 and 20 °C for EtSH; 87-89% at 30 °C and 82-98% at 5 and 20 °C for t-BuSH; 61-73% at 30 °C and 76-98% at 5 and 20 °C for 1-BuSH. Results for other sulfides and disulfides (DMS, EMS, DMDS, DEDS) indicated stable relative recoveries with little dependency on temperature (83-103% after 24 hours). DMTS had clear loss trends (with relative recoveries of 74-87% in the three bag types after 24 hours) but showed minor differences in relative recoveries at 5, 20, and 30 °C.
More Related Videos
07:57Quantitative Detection of Trace Explosive Vapors by Programmed Temperature Desorption Gas Chromatography-Electron Capture Detector
Published on: July 25, 2014
05:29Profiling Volatile Compounds in Blackcurrant Fruit using Headspace Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry
Published on: June 9, 2021
Related Concept Videos
Volatilization
Sample Handling
Samples should be transported carefully from collection points to the laboratory. They should be properly sealed and clearly labeled to prevent cross-contamination. To preserve the sample integrity, optimal temperature conditions during transport are essential. This could involve using...
Atomic Spectroscopy: Effects of Temperature
At thermal equilibrium, the relative populations of excited and ground state atoms can be estimated using the Maxwell–Boltzmann distribution. For example, an increase in temperature...
Supercritical Fluid Chromatography
SFC utilizes a supercritical fluid mobile phase,...
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...