Potential of Presep(®) PolyChelate as a chelating resin: comparative study with some aminocarboxylic acid-type resins

The potential of Presep(®) PolyChelate as a chelating resin was studied in detail. The chelating resin with extraction capacity for Cu of 0.30 mmol L(-1) could quantitatively extract Cd, Co, Cu, Fe, Mo, Ni, Pb, V, and Zn at pH 4 or 5.5; however, only very scant amounts of Na, K, Mg, and Ca were captured at pH levels below 7. The quantitative extraction could be achieved in 100 - 1000 mL of artificial seawater and at a flow rate of 3 - 30 mL min(-1). The performance of Presep(®) PolyChelate was compared to the other aminocarboxylic acid-type chelating resins, including Nobias Chelate-PA1, Chelex 100, Muromac B-1, Lewatit TP 207, and NTA Superflow, under the same conditions. The solid-phase extraction of the nine elements in the certified reference material (ES-L-1, ground water) and a commercially available table salt was also demonstrated.