Related Experiment Video
Updated: May 6, 2026

Quasi-light Storage for Optical Data Packets
Published on: February 6, 2014
Experimental demonstration of elastic optical networks based on enhanced software defined networking (eSDN) for data
Abstract:
Due to the high burstiness and high-bandwidth characteristics of the applications, data center interconnection by elastic optical networks have attracted much attention of network operators and service providers. Many data center applications require lower delay and higher availability with the end-to-end guaranteed quality of service. In this paper, we propose and implement a novel elastic optical network based on enhanced software defined networking (eSDN) architecture for data center application, by introducing a transport-aware cross stratum optimization (TA-CSO) strategy. eSDN can enable cross stratum optimization of application and elastic optical network stratum resources and provide the elastic physical layer parameter adjustment, e.g., modulation format and bandwidth. We have designed and verified experimentally software defined path provisioning on our testbed with four real OpenFlow-enabled elastic optical nodes for data center application. The overall feasibility and efficiency of the proposed architecture is also experimentally demonstrated and compared with individual CSO and physical layer adjustment strategies in terms of path setup/release/adjustment latency, blocking probability and resource occupation rate.
Related Concept Videos
Elastic Curve from the Load Distribution
For all beams, the analysis of the beam's reaction to distributed loads begins by understanding the relationship between a beam's load and the resulting shear forces and bending moments. Initially, this...
Elastic Strain Energy for Shearing Stresses
Elasticity
The elasticity of an object can be described by a stress-strain curve, which represents the relationship between stress...
Elastic Strain Energy for Normal Stresses
If...
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...

