Related Experiment Video
Updated: May 6, 2026

Accessing the Cytotoxicity and Cell Response to Biomaterials
Published on: July 8, 2021
(α'(H))-Dicalcium silicate bone cement doped with tricalcium phosphate: characterization, bioactivity and
Piedad N de Aza1, Fausto Zuleta, Pablo Velasquez
1Instituto de Bioingeniería, Universidad Miguel Hernández, Avda. de la Universidad s/n, 03202, Elche, Alicante, Spain, piedad@umh.es.
Abstract:
The influence of phosphorus doping on the properties of (α'(H))-dicalcium silicate (C(2)S) bone cement was analyzed, in addition to bioactivity and biocompatibility. All the cements were composed of a solid solution of TCP in C(2)S ([Formula: see text]-C(2)S(ss)) as the only phase present. The compressive strength ranged from 3.8-16.3 MPa. Final setting times ranged from 10 to 50 min and were lower for cements with lower L/P content. Calcium silicate hydrate was the principal phase formed during the hydration process of the cements. The cement exhibited a moderate degradation and could induce carbonated hydroxyapatite formation on its surface and into the pores. The cell attachment test showed that the (α'(H))-C(2)SiO(4) solid solution supported human adipose stem cells adhesion and spreading, and the cells established close contacts with the cement after 24 h of culture. The novel (α'(H))-C(2)S(ss) cements might be suitable for potential applications in the biomedical field, preferentially as materials for bone/dental repair.
Related Concept Videos
Hydration of Cement
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Essential Minerals for Bone Health
Calcium and Phosphorus
Calcium is a critical component of bones, especially in the form of calcium phosphate and calcium carbonate. Since the body cannot make calcium, it must be obtained from the diet. However, calcium cannot be absorbed from the small intestine without...

