COD and TOC analysis of leachate from a solidified organic waste

Several combinations of binders and absorbent additives were utilized to solidify a typical organic waste, API Separator sludge. The effectiveness of the materials was based on the waste leachability from the solidified samples. COD and TOC analyses were used to determine the organic content of the leachate samples.The ability of the COD and TOC analyses to assess waste leachability was limited. The inability of the COD and TOC tests to differentiate between organic compounds made the results difficult to interpret. This was due to organic contaminants from the solidification materials contributing to the COD and TOC contents of the leachates. Also, the COD test may have be influenced by reduced inorganic compounds contained in the flyash binder and the sludge. Representative samples for the TOC analysis were difficult to obtain for the leachates containing oils or suspended particles. It is recommended that the COD and TOC tests only be used as a screening method for determining solidified organic waste leachability and other methods need to be employed to obtain more accurate results.