A novel structure for removal of pollutants from wastewater

Dried water hyacinth was subjected to molecular modifications using quantum mechanical calculations. The model simulates the modified plant as 3 cellulose units, one lignin and some metal oxides namely CaO; FeO and Al(OH)3 are attached through O-Linkage. The model suggests the ability to remove inorganic pollutants from wastewater according to unique hydrogen bonding and high total dipole moment. Based on this model microspheres are synthesized in the laboratory from dried water hyacinth and chitosan following self-assembly method. FTIR spectrum of microspheres exhibits only the characteristic bands for raw materials which give strong evidence that the formed material is a composite. The analysis of SEM micrographes of microspheres showed that the fibers of water hyacinth are imbedded in the crosslinked chitosan matrix. Batch adsorption kinetic models revealed that the sorption of lead ions on microsphere was very fast and the equilibrium was rapidly attained within 30 min. and properly correlated with the second-order kinetic model. Different models of isotherm sorption were used to describe the Pb (II) adsorption onto microspheres. From Langmuir isotherm, the maximum adsorption capacity (q(max)) for Pb(II) was 312.5 mg/g, which is about 3 times higher than that of the crude hyacinth. The free energy (E) was 15.798 kJ/mol which shows that the sorption process is endothermic and the mechanism of reaction is an ion-exchange. Even after four cycles of adsorption-desorption, the adsorption capacity was maintained and the decline in efficiency was less than 10%.