Citric acid crosslinking of paper products for improved high-humidity performance
Petri Widsten1, Nicola Dooley, Robin Parr
1Scion, Te Papa Tipu Innovation Park, 49 Sala Street, Private Bag 3020, Rotorua, New Zealand.
Abstract:
Fibre crosslinking with polycarboxylic acids can be used to improve certain properties of paper products, including wet tensile and compressive strength. In the present work it was proposed that citric acid (CA) crosslinks the cellulosic fibres of linerboard by self-catalysed esterification of cellulosic hydroxyl groups, which makes an additional catalyst unnecessary. An increase in CA dose or curing temperature increased linerboard compressive strength. In CA-treated corrugated board most of the applied CA was esterified with fibres while some CA thermolysis products were also present. A significant portion of the applied CA was unaccounted for. The deficit was attributed to thermolysis to give volatile anhydrides of unsaturated acids. Under cyclic humidity and static compressive loading, CA-treated corrugated boxes showed a greater than three-fold increase in resistance to compressive creep, showing that CA treatment can be used to extend the lifetime of corrugated boxes used for horticultural produce storage.
Related Concept Videos
Hydration of Cement
Products of the Citric Acid Cycle
Adaptations that Reduce Water Loss
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Carbonation Shrinkage
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction...
The Citric Acid Cycle: Overview
The citric...


