Related Experiment Video
Updated: May 5, 2026

08:48
Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
7.0K
Transverse modes of a laser using volume Bragg grating as the cavity mirror
Optics Letters
|December 11, 2013
Abstract:
A simulation and experiment were performed to demonstrate that a laser using volume Bragg grating as one of the cavity mirrors can achieve lasing even if the laser cavity length exceeds the traditional stable cavity condition. The laser transverse mode changes from a Gaussian beam into a ring-shaped mode as the laser cavity length increases from stable to unstable cavity conditions. At the same time, the effective modal reflectivity is reduced as the cavity length increases.
Related Concept Videos
Standing Waves in a Cavity
1.7K
A household microwave and lasers are examples of standing electromagnetic waves in a cavity. When two conducting metal plates are placed parallel at the nodal planes, it creates a cavity where standing waves are formed. The cavity between the two planes is analogous to a stretched string held at the points x = 0 and x = L. Here, the distance 'L' between the two planes must be an integer multiple of half of the wavelength. The wavelengths that satisfy this condition are given by:
1.7K
Confocal Fluorescence Microscopy
16.0K
Confocal microscopy is an advanced microscopic technique. The prime advantage of the confocal microscope over other microscopy techniques is its ability to block the out-of-focus light from the illuminated samples using pinholes. It is widely used with fluorescence optics to obtain high-resolution, sharp contrast images. Unlike optical microscopes, confocal microscopes use a focused beam of light laser to scan the entire sample surface at different z-planes. These microscopes are, therefore,...
16.0K

