Related Experiment Video
Updated: May 4, 2026
Microfluidic Chip Fabrication and Method to Detect Influenza
Published on: March 26, 2013
Magnetic nanoparticle-based immunoassay for rapid detection of influenza infections by using an integrated
Lien-Yu Hung1, Jui-Cheng Chang2, Yi-Che Tsai3
1Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan.
Abstract:
Magnetic manganese ferrite (MnFe2O4) nanoparticles with approximately 100nm in diameter were used to improve the performance of an immunoassay for detecting influenza infections. The synthesized nanoparticles were tested for long-term storage to confirm the stability of their thermal decomposition process. Then, an integrated microfluidic system was developed to perform the diagnosis process automatically, including virus purification and detection. To apply these nanoparticles for influenza diagnosis, a micromixer was optimized to reduce the dead volume within the microfluidic chip. Furthermore, the mixing index of the micromixer could achieve as high as 97% in 2seconds. The optical signals showed that this nanoparticle-based immunoassay with dynamic mixing could successfully achieve a detection limit of influenza as low as 0.007 HAU. When compared with the 4.5-μm magnetic beads, the optical signals of the MnFe2O4 nanoparticles were twice as sensitive. Furthermore, five clinical specimens were tested to verify the usability of the developed system.
From The Clinical Editor:
In this study, magnetic manganese ferrite nanoparticles were used to improve the performance of a novel immunoassay for the rapid and efficient detection of influenza infections.
