Tribological properties of biocompatible Ti-10W and Ti-7.5TiC-7.5W

This study investigates and compares the microstructure, biocompatibility, and tribological properties of two different Ti-based composites, Ti-10W and Ti-7.5TiC-7.5W, with those of pure Ti for their potential use in biomedical applications. In particular, cold and hot isostatic-pressing and arc-melting methods were utilized and compared for the microstructure of the composites. Nano-scratch measurements and pin-on-disk wear tests were employed to understand their tribological behavior. As compared to pure Ti, Ti-10W and Ti-7.5TiC-7.5W showed significantly improved nano-scratch resistance (by 85 and 77%, respectively) and wear resistance (by 64 and 66%, respectively), in good agreement with hardness measurements. For biocompatibility examination, both microculture tetrazolium test (MTT) and water soluble tetrazolium (WST-1) test were used to quantify the cell viability of human osteoblasts and mouse fibroblasts on the materials. Both of the Ti-based composites showed acceptable biocompatibility in comparison with the pure Ti control.