Influence of process parameters on phosphorus recovery by struvite formation from urine

Batch experiments were conducted to examine the influence of various process parameters on phosphorus (P) recovery by struvite formation from urine. The results showed that the Mg/P molar ratio is one of the most important parameters affecting P recovery. The Mg/P molar ratio of 1.3 was found the most reasonable for struvite formation, and the P removal efficiency reached more than 96.6%. An increase in pH of urine solutions from 8.7 to 10.0 did not significantly affect P removal, but the quality of crystal formed at pH 10.0 was poor based on scanning electron microscopy analysis. A longer mixing time positively affected struvite formation, and compared to without mixing, the P removal efficiency increased from 72.7 to 97.3% after 5 min of mixing. The addition of seed material had no influence on the P removal efficiency, but contributed to the formation of struvite clusters.