Carbon black anchored vanadium oxide nanobelts and their post-sintering counterpart (V2O5 nanobelts) as high...

Carbon black (CB) anchored vanadium oxide (C-VOx) nanobelts are successfully prepared by a simple sol-gel route and subsequent hydrothermal treatment. The synthesized C-VOx nanobelts display high specific capacity and good cycling stability as a cathode material for lithium ion batteries (LIBs) (232 mA h g(-1) at initial discharge and 195 mA h g(-1) during 50th discharge at a current density of 100 mA g(-1) between 1.5-4 V versus Li) due to the nano-belted morphology and closely attached CB. The orthorhombic V2O5 nanobelts can be obtained by post-sintering of C-VOx nanobelts in air. These V2O5 nanobelts, which maintain their previous belted morphology and possess higher vanadium valence, exhibit superior electrochemical properties, especially the higher specific capacity (406 mA h g(-1) and 220 mA h g(-1) during the 1st and 50th discharge at a current density of 100 mA g(-1), and 146 mA h g(-1) at a current density of 1000 mA g(-1) between 1.5-4 V versus Li). Both of them can be used as high performance cathode materials for LIB application. Furthermore, a full-cell using V2O5 nanobelts as the cathode and lithiated graphite as the anode is assembled and its electrochemical performance is measured in the voltage range of 1.5-3.8 V.