Related Experiment Video
Updated: May 3, 2026

Transmission of Multiple Signals through an Optical Fiber Using Wavefront Shaping
Published on: March 20, 2017
Flexible all-optical frequency allocation of OFDM subcarriers
Abstract:
We investigate the underlying mechanism that allows OFDM subcarriers in an all-optical OFDM system to be assigned to any optical frequency using an optical filter, even if that frequency is not generated by the comb-line source feeding the filters. We confirm our analysis using simulations, and present experimental results from a 252-subcarrier system that uses a mode-locked laser (MLL) as the comb source and a wavelength selective switch. The experimental results show that there is no correlation between the programmed frequency offset between a subcarrier and nearest comb line, and the received signal quality. Thus, subcarriers could be inserted into unused portions of an optical transmission system's spectrum without restriction on their particular center frequencies. Any percentage of cyclic prefix can be added to the OFDM symbol simply by reprogramming the optical filter to give wider subcarrier frequency spacing than the comb line spacing, which is useful for tailoring the CP to the dispersion of various optical transmission paths, to maximize the spectral efficiency. Finally, the MLL's center frequency need not be locked to a system reference.
Related Concept Videos
Properties of Fourier Transform II
The Frequency Shifting property of Fourier Transforms highlights that a shift in the frequency domain corresponds to a phase shift in the time domain. Mathematically, if x(t) has...
Properties of Fourier Transform I
In radio broadcasting, multiple audio signals often need to be transmitted simultaneously. The Fourier...
IR Frequency Region: X–H Stretching
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Time and frequency -Domain Interpretation of Phase-lag Control
Phase-lag controllers do not place a pole at zero, but instead influence the steady-state error by amplifying any...
Bandpass Sampling
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2....

