Related Experiment Video
Updated: May 3, 2026
07:45
Quasi-light Storage for Optical Data Packets
Published on: February 6, 2014
10.1K
DSBCS modulation scheme for hybrid wireless and cable television system.
Optics Express
|February 12, 2014
Summary
This study introduces a novel double sideband with optical carrier suppression (DSBCS) modulation for hybrid systems. The technique achieves excellent signal quality and carrier suppression, proving promising for practical applications.
Area of Science:
- Optoelectronics
- Optical Communications
- Signal Processing
Background:
- Hybrid wireless and cable television systems require efficient modulation schemes.
- Carrier suppression is crucial for improving signal quality and reducing interference.
Purpose of the Study:
- To develop and demonstrate a double sideband with optical carrier suppression (DSBCS) modulation scheme.
- To evaluate the performance of the proposed scheme in a hybrid system.
Main Methods:
- Utilized a phase modulator (PM) and a polarization beam splitter (PBS).
- Implemented a DSBCS modulation scheme.
- Transmitted signals over 25 km.
Main Results:
- Achieved a carrier suppression ratio greater than 20 dB.
- Maintained carrier-to-noise ratio, composite second-order, and composite triple beat above threshold values after 25 km.
- Demonstrated good power penalty performance and successful upstream signal constellation recovery.
Conclusions:
- The proposed DSBCS modulation scheme is highly effective for hybrid systems.
- The scheme exhibits excellent signal quality and transmission performance.
- The technology shows significant promise for practical implementation in television systems.
Related Concept Videos
01:24Cable Subjected to a Distributed Load
1.4K
The analysis of suspension bridges is a complex and critical process that involves multiple factors, including the shape and tension of the main cables. The main cables of suspension bridges are subjected to distributed loads, which result in changes in tensile forces and deformation of the cable. These loads must be carefully considered to ensure that the bridge is safe and capable of supporting the weight of different loads.
1.4K
01:28Cable Subjected to Concentrated Loads
1.7K
Flexible cables are commonly used in various applications for support and load transmission. Consider a cable fixed at two points and subjected to multiple vertically concentrated loads. Determine the shape of the cable and the tension in each portion of the cable, given the horizontal distances between the loads and supports.
1.7K
01:23Design Example
698
The innovation of touch-tone telephony revolutionized the telecommunications industry by replacing the traditional rotary dial with a dual-tone multi-frequency (DTMF) signaling system. This system uses a matrix-style keypad with buttons arranged in four rows and three columns, creating 12 distinct signals each assigned to a pair of frequencies. Each button press results in a simultaneous generation of two sinusoidal tones – one from a low-frequency group (697 to 941 Hz) and one from a...
698
01:25Secondary Distribution
691
Secondary distribution systems provide electrical energy at the utilization voltage levels from distribution transformers to customer meters. Typical secondary voltages in the United States include 120/240 V for residential use, 208Y/120 V for residential and commercial use, and 480Y/277 V for industrial and high-rise commercial use.
In residential areas, 120/240 V single-phase, three-wire service is commonly used for lighting, outlets, and large appliances. Urban areas with high-density loads...
In residential areas, 120/240 V single-phase, three-wire service is commonly used for lighting, outlets, and large appliances. Urban areas with high-density loads...
691
01:29Cable: Problem Solving
868
When dealing with a cable that is fixed to two supports and subjected to uniform loading, it is crucial to determine the maximum tension in the cable. This process can be broken down into several key steps, as outlined below:
868
01:31Energy Stored In A Coaxial Cable
2.1K
A coaxial cable consists of a central copper conductor used for transmitting signals, followed by an insulator shield, a metallic braided mesh that prevents signal interference, and a plastic layer that encases the entire assembly.
In the simplest form, a coaxial cable can be represented by two long hollow concentric cylinders in which the current flows in opposite directions. The magnetic field inside and outside the coaxial cable is determined by using Ampère's law. The magnetic field...
In the simplest form, a coaxial cable can be represented by two long hollow concentric cylinders in which the current flows in opposite directions. The magnetic field inside and outside the coaxial cable is determined by using Ampère's law. The magnetic field...
2.1K