Related Experiment Video
Updated: May 3, 2026

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Single stage Yb-doped fiber laser based on gain switching with short pulse duration
Abstract:
A simple solution for producing nanosecond laser pulses can be obtained using gain-switched fiber lasers. In this paper, we present an optimized single stage gain-switched ytterbium-doped fiber laser. Three fiber lengths were tested to show the impact of length on the laser output pulse. A pulse as short as 28 ns at 1.4 kW peak power and a maximum peak power of nearly 2 kW at 41 ns pulse duration was achieved. The laser possess a linear polarized output, very good beam quality of M2 < 1.1, and a spectral bandwidth of 0.11 nm.
More Related Videos
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
14:18Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016