Direct growth of cobalt hydroxide rods on nickel foam and its application for energy storage
Rahul R Salunkhe1, Bishnu Prasad Bastakoti, Chun-Tsung Hsu
1World Premier International (WPI) Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan), http://www.yamauchi-labo.com.
Abstract:
The present work reports synthesis of cobalt hydroxide (Co(OH)2) rods on nickel foam and its supercapacitor application. Hierarchical Co(OH)2 rods with length of approximately 3.5 μm and diameter of approximately 400 nm were prepared by one-step, simple, and inexpensive chemical-bath-deposition method. The direct growth of Co(OH)2 rods on the Ni foam gave three dimensional (3D) structure for easy access of electrolyte throughout material surface. Also, well-adhered interface between Co(OH)2 rods and Ni-foam surface gave better conduction channels. Detailed electrochemical study was performed by using cyclic voltammetry and galvanostatic charge/discharge measurements. The results demonstrate that Co(OH)2 rods on Ni foam are efficient electrodes for supercapacitor application.
More Related Videos
10:15Solar-Driven Electrochemical Green Fuel Production from CO2 and Water Using Ti3C2Tx MXene-Supported CuZn and NiCo Catalysts
Published on: November 7, 2025
07:57Author Spotlight: A Rapid, Microwave-Assisted Hydrothermal Synthesis Of Nickel Hydroxide Nanosheets
Published on: August 18, 2023
