Comparative Assessment of Gasification Based Coal Power Plants with Various CO₂ Capture Technologies Producing...

Seven different types of gasification-based coal conversion processes for producing mainly electricity and in some cases hydrogen (H₂), with and without carbon dioxide (CO₂) capture, were compared on a consistent basis through simulation studies. The flowsheet for each process was developed in a chemical process simulation tool "Aspen Plus". The pressure swing adsorption (PSA), physical absorption (Selexol), and chemical looping combustion (CLC) technologies were separately analyzed for processes with CO₂ capture. The performances of the above three capture technologies were compared with respect to energetic and exergetic efficiencies, and the level of CO₂ emission. The effect of air separation unit (ASU) and gas turbine (GT) integration on the power output of all the CO₂ capture cases is assessed. Sensitivity analysis was carried out for the CLC process (electricity-only case) to examine the effect of temperature and water-cooling of the air reactor on the overall efficiency of the process. The results show that, when only electricity production in considered, the case using CLC technology has an electrical efficiency 1.3% and 2.3% higher than the PSA and Selexol based cases, respectively. The CLC based process achieves an overall CO₂ capture efficiency of 99.9% in contrast to 89.9% for PSA and 93.5% for Selexol based processes. The overall efficiency of the CLC case for combined electricity and H₂ production is marginally higher (by 0.3%) than Selexol and lower (by 0.6%) than PSA cases. The integration between the ASU and GT units benefits all three technologies in terms of electrical efficiency. Furthermore, our results suggest that it is favorable to operate the air reactor of the CLC process at higher temperatures with excess air supply in order to achieve higher power efficiency.