Biomolecule-adsorption-dependent piezoelectric output of ZnO nanowire nanogenerator and its application as...

Self-powered active biosensor has been realized from ZnO nanowire (NW) nanogenerator (NG). The piezoelectric output generated by ZnO NW NG can act not only as a power source for driving the device, but also as a biosensing signal. After immersing in 10(-3) g ml(-1) human immunoglobulin G (IgG), the piezoelectric output voltage of the device under compressive deformation decreases from 0.203±0.0176 V (without IgG) to 0.038±0.0035 V. Such a self-powered biosensor has higher response than transistor-type biosensor (I-V behavior). The response of self-powered biosensor is in a linear relationship with IgG concentration (logarithm, 10(-7)-10(-3) g ml(-1)) and the limit of detection (LOD) on IgG of the device is about 6.9 ng ml(-1). The adsorption of biomolecules on the surface of ZnO NWs can modify the free-carrier density, which vary the screening effect of free-carriers on the piezoelectric output. The present results demonstrate a feasible approach for actively detecting biomolecules by coupling the piezotronic and biosensing characteristics of ZnO NWs.