Gamma irradiation: a method to produce an abiotic control for biological activated carbon

The aim of this paper was to investigate the feasibility of using gamma irradiation to inhibit the microbial activity of biological powder activated carbon (PAC) without impacting its adsorptive properties. First of all, the range of dose of gamma rays required to produce abiotic PAC was selected on the basis of heterotrophic plate counts (HPC) inactivation and methylene blue (MB) adsorption kinetics. Doses inferior to 10 kGy were not sufficient to inhibit the culture of heterotrophic bacteria. On the other hand, doses superior to 15 kGy were demonstrated to affect the adsorption rate of MB. Consequently, a dose comprised between 10 and 15 kGy was selected for further investigation. In order to validate the adequacy of the range of dose (i.e. 10-15 kGy), adsorption characteristics were tested by monitoring the removal kinetics of refractory dissolved organic carbon (RDOC). No significant differences were observed between irradiated and non-irradiated biological PAC for the adsorption of RDOC. Irradiated, non-irradiated and virgin PAC were also evaluated in terms of abundance of viable (using the LIVE/DEAD BacLight method) bacteria and in terms of heterotrophic biomass activity. The results of the BacLight method demonstrated that attachment of the biofilm on the PAC was not impacted by the irradiation and heterotrophic activity measurements demonstrated that the latter could be radically reduced in the range of dose selected. In conclusion, when using a proper dose, the gamma irradiation of colonized activated carbon drastically reduced the heterotrophic activity on activated carbon without significantly impacting its adsorptive behaviour.