The effect of ash composition on gasification of poultry wastes in a fluidized bed reactor

The effect of ash composition on the fluidized bed gasification behaviour of poultry wastes was investigated by operating a pre-pilot scale reactor with two batches of manure obtained from an industrial chicken farm. The experimental runs were carried out by keeping the fluidized bed velocity fixed (at 0.4m s(-1)) and by varying the equivalence ratio between 0.27 and 0.40, so obtaining bed temperature values between 700 and 800 °C. The performance of the gasification process was assessed by means of mass balances as well as material and feedstock energy analyses, and reported in terms of cold gas efficiency (CGE), specific energy production, low heating value of obtained syngas and yield of undesired by-products. The experimental results indicate the crucial role of ash amount and composition of the two poultry wastes. In particular, higher ash content (25.1% instead of 17.2%) and higher fractions of calcium, phosphorous and potassium (with an increase of 24, 30 and 28%, respectively) induce a dramatic reduction of all the process performance parameters: CGE reduces from 0.63 to 0.33 and the specific energy from 2.1 to 1.1 kWh kg(fuel)(-1). At the same time, the formation of alkali compounds and their behaviour inside the fluidized bed reactor determine an increase of feedstock energy losses, which is related to occurrence of sintering and bridging between bed particles.