Enhancing gas chromatography-time of flight mass spectrometry data analysis using two-dimensional mass channel...

A novel data reduction and representation method for gas chromatography time-of-flight mass spectrometry (GC-TOFMS) is presented that significantly facilitates separation visualization and analyte peak deconvolution. The method utilizes the rapid mass spectral data collection rate (100 scans/s or greater) of current generation TOFMS detectors. Chromatographic peak maxima (serving as the retention time, tR) above a user specified signal threshold are located, and the chromatographic peak width, W, are determined on a per mass channel (m/z) basis for each analyte peak. The peak W (per m/z) is then plotted against its respective tR (with 10 ms precision) in a two-dimensional (2D) format, producing a cluster of points (i.e., one point per peak W versus tR in the 2D plot). Analysis of GC-TOFMS data by this method produces what is referred to as a two-dimensional mass channel cluster plot (2D m/z cluster plot). We observed that adjacent eluting (even coeluting) peaks in a temperature programmed separation can have their peak W vary as much as ∼10-15%. Hence, the peak W provides useful chemical selectivity when viewed in the 2D m/z cluster plot format. Pairs of overlapped analyte peaks with one-dimensional GC resolution as low as Rs ≈ 0.03 can be visually identified as fully resolved in a 2D m/z cluster plot and readily deconvoluted using chemometrics (i.e., demonstrated using classical least-squares analysis). Using the 2D m/z cluster plot method, the effective peak capacity of one-dimensional GC separations is magnified nearly 40-fold in one-dimensional GC, and potentially ∼100-fold in the context of comparing it to a two-dimensional separation. The method was studied using a 73 component test mixture separated on a 30 m × 250 μm i.d. RTX-5 column with a LECO Pegasus III TOFMS.