Related Experiment Video
Updated: May 1, 2026

Direct Comparison of Hyperspectral Stimulated Raman Scattering and Coherent Anti-Stokes Raman Scattering Microscopy for Chemical Imaging
Published on: April 28, 2022
Contrast enhancement using silica microspheres in coherent anti-Stokes Raman spectroscopic imaging
Abstract:
Coherent anti-Stokes Raman scattering (CARS) microscopy is a powerful imaging technique that can provide chemical information of organic and nonorganic materials through vibrational spectroscopy. However, its contrast is not sufficient for monitoring thin film materials. In this study, silica microspheres were employed for enhancing the signal contrast in CARS imaging. One layer of optically transparent silica microspheres was self-assembled onto polymer grating samples to enhance the CARS signals. The highest contrast enhancement factor of 12.5 was achieved using 6.1-μm-diameter microspheres. Finite-difference time-domain method (FDTD) simulation was conducted to simulate the contrast enhancement with silica microspheres of different diameters.
Related Concept Videos
Phase Contrast and Differential Interference Contrast Microscopy
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...
Imaging Biological Samples with Optical Microscopy
In optical microscopy, the specimen to be viewed is placed on a glass slide and clipped on the stage...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Super-resolution Fluorescence Microscopy

