Related Experiment Video
Updated: May 1, 2026

Comparison of Two Different Synthesis Methods of Single Crystals of Superconducting Uranium Ditelluride
Published on: July 8, 2021
Efficient removal of crystal violet dye from aqueous solutions by vitreous tuff mineral
Abstract:
Textural, structural and morphological characteristics of the vitreous tuff were determined by means of several physicochemical techniques. The nitrogen adsorption isotherm at 77 K was fitted with the Brunnauer-Emmet-Teller model and together with the results of the average pore distribution showed a mesoporous material. Samples of vitreous tuff were used as adsorbent to study the removal of crystal violet from aqueous solution. The presence of -OH moieties in the material seems to be responsible for the removal of the dye showing that vitreous tuff can be used as an organic dye adsorbent material. The pseudo-second-order model was the best fit model for describing the sorption process of crystal violet; intraparticle diffusion being the controlling step in the process. The experimental adsorption isotherm was fitted with Langmuir, Freundlich and Langmuir-Freundlich models, showing better correlation with the second one. The adsorption capacity was 170.01 mg/g, being among the highest compared with other inorganic and organic common sorbent materials. The design of single stage of the adsorber can predict the behaviour to potential scale up. This mineral has a very good potential as an adsorbent material for organic dyes.
Related Concept Videos
Recrystallization: Solid–Solution Equilibria
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Simple Staining Technique
Washing, Drying, and Ignition of Precipitates

