High crystalline dithienosilole-cored small molecule semiconductor for ambipolar transistor and nonvolatile memory
Woonggi Kang1, Minwoo Jung, Wonsuk Cha
1SKKU Advanced Institute of Nanotechnology (SAINT), School of Chemical Engineering, Sungkyunkwan University , Suwon 440-746, Republic of Korea.
Abstract:
We characterized the electrical properties of a field-effect transistor (FET) and a nonvolatile memory device based on a solution-processable low bandgap small molecule, Si1TDPP-EE-C6. The small molecule consisted of electron-rich thiophene-dithienosilole-thiophene (Si1T) units and electron-deficient diketopyrrolopyrrole (DPP) units. The as-spun Si1TDPP-EE-C6 FET device exhibited ambipolar transport properties with a hole mobility of 7.3×10(-5) cm2/(Vs) and an electron mobility of 1.6×10(-5) cm2/(Vs). Thermal annealing at 110 °C led to a significant increase in carrier mobility, with hole and electron mobilities of 3.7×10(-3) and 5.1×10(-4) cm2/(Vs), respectively. This improvement is strongly correlated with the increased film crystallinity and reduced π-π intermolecular stacking distance upon thermal annealing, revealed by grazing incidence X-ray diffraction (GIXD) and atomic force microscopy (AFM) measurements. In addition, nonvolatile memory devices based on Si1TDPP-EE-C6 were successfully fabricated by incorporating Au nanoparticles (AuNPs) as charge trapping sites at the interface between the silicon oxide (SiO2) and cross-linked poly(4-vinylphenol) (cPVP) dielectrics. The device exhibited reliable nonvolatile memory characteristics, including a wide memory window of 98 V, a high on/off-current ratio of 1×10(3), and good electrical reliability. Overall, we demonstrate that donor-acceptor-type small molecules are a potentially important class of materials for ambipolar FETs and nonvolatile memory applications.
Related Concept Videos
Types of Semiconductors
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Bipolar Junction Transistor
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...


