Related Experiment Video
Updated: May 1, 2026

Fabric Moisture Uniform Control to Study the Influence of Air Impingement Parameters on Fabric Drying Characteristics
Published on: August 19, 2019
Drying characteristics of paddy in an integrated dryer
M R Manikantan1, P Barnwal2, R K Goyal3
1Central Institute of Post Harvest Engineering and Technology, Ludhiana, India.
Abstract:
Drying characteristics of paddy (long grain variety PR-118 procured from PAU, Ludhiana) in an integrated dryer using single as well as combined heating source was studied at different air temperatures. The integrated dryer comprises three different air heating sources such as solar, biomass and electrical. Drying of paddy occurred in falling rate period. It was observed that duration of drying of paddy from 22 to 13 % moisture content (w.b.) was 5-9 h depending upon the source of energy used. In order to select a suitable drying curve, six thin layer-drying models (Newton, Page, Modified Page, Henderson and Pabis, Logarithmic and Wang and Singh) were fitted to the experimental moisture ratio data. Among the mathematical models investigated, Wang and Singh model best described the drying behaviour of paddy using solar, biomass and combined heating sources with highest coefficient of determination (r (2)) values and least chi-square, χ (2), mean bias error (MBE) and root mean square error (RMSE) values. However, Page model adequately described the drying behavior of paddy using electrical heating source.
More Related Videos
08:52Method to Produce Durable Pellets at Lower Energy Consumption Using High Moisture Corn Stover and a Corn Starch Binder in a Flat Die Pellet Mill
Published on: June 15, 2016
09:39Production and Testing of Moisture Behavior and Thermal Properties of Rapeseed Straw and Ganoderma resinaceum Mycelium Bio-Composites
Published on: September 5, 2025
Related Concept Videos
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Responses to Drought and Flooding
Moisture Content and Bulking of Aggregate
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...