Self-tuning control with a filter and a neural compensator for a class of nonlinear systems
Abstract:
Considering the mismatching of model-process order, in this brief, a self-tuning proportional-integral-derivative (PID)-like controller is proposed by combining a pole assignment self-tuning PID controller with a filter and a neural compensator. To design the PID controller, a reduced order model is introduced, whose linear parameters are identified by a normalized projection algorithm with a deadzone. The higher order nonlinearity is estimated by a high order neural network. The gains of the PID controller are obtained by pole assignment, which together with other parameters are tuned on-line. The bounded-input bounded-output stability condition and convergence condition of the closed-loop system are presented. Simulations are conducted on the continuous stirred tank reactors system. The results show the effectiveness of the proposed method.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
08:35Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control Systems
At the heart...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
