Power generation from cassava alcohol wastewater: effects of pretreatment and anode aeration

Cassava alcohol wastewater produced from the bioethanol production industry is carbohydrate-rich wastewater with large quantities of insoluble organic compounds. Microbial fuel cells (MFCs) were used for electricity recovery and pollutants removal from this wastewater. Different pretreatment methods (solid-liquid separation, ultrasonication, pre-fermentation) and anode-aeration modes were explored in MFCs aimed to enhance the efficiency of power generation and pollutants removal. Pre-fermentation was found to be the most effective pretreatment method. A maximum power density of 437.13 ± 15.6 mW/m(2) and TCOD removal of 62.5 ± 3.5% were achieved using the pre-fermented wastewater, 150 and 20% higher than the un-pretreated control. Aeration in anode chamber could promote the hydrolysis of organic matter and production of VFAs in the raw wastewater, and increase TCOD removal and power density. Pre-fermentation coupled with halfway anode aeration may be a feasible strategy to enhance power generation and pollutants removal from the cassava wastewater in MFCs.