Electrochemical detection of p-aminophenol by flexible devices based on multi-wall carbon nanotubes dispersed in
Graziella Scandurra1, Arena Antonella2, Carmine Ciofi3
1Department of Electronic Engineering, Chemistry and Industrial Engineering, Messina University, Messina 98166, Italy. gscandurra@unime.it.
Abstract:
A conducting composite prepared by dispersing multi-walled carbon nanotubes (MWCNTs) into a host matrix consisting of Nafion, electrochemically doped with copper, has been prepared, characterized and used to modify one of the gold electrodes of simply designed electrochemical cells having copier grade transparency sheets as substrates. Electrical measurements performed in deionized water show that the Au/Nafion/Au-MWCNTs-Nafion:Cu cells can be successfully used in order to detect the presence of p-aminophenol (PAP) in water, without the need for any supporting electrolyte. The intensity of the redox peaks arising when PAP is added to deionized water is found to be linearly related to the analyte in the range from 0.2 to 1.6 µM, with a detection limit of 90 nM and a sensitivity of 7 µA·(µM(-1))·cm(-2).
More Related Videos
12:20Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
09:15Iridium Oxide-reduced Graphene Oxide Nanohybrid Thin Film Modified Screen-printed Electrodes as Disposable Electrochemical Paper Microfluidic pH Sensors
Published on: November 22, 2016
