Related Experiment Video
Updated: Apr 28, 2026

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System
Published on: July 18, 2015
Design of a lens-to-channel waveguide system as a solar concentrator structure
Abstract:
We present a lens-to-channel waveguide solar concentrator, where the lens array and the channel waveguide act as the primary and the secondary concentrator. Sunlight collected by the lens array is coupled into channel waveguides and exits from one end of the tapered waveguide directly onto photovoltaic cells. A 45°coupler is placed at each lens focal point to couple light into the waveguides. This configuration eliminates any inherent decoupling losses. We provide a detailed math model and simulation results using exemplar system parameters, showing that this structure can achieve 800x concentration at 89.1% optical efficiency under ±0.7° incidence angle.
More Related Videos
09:00Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass ADG Fresnel Lens for Concentrating Photovoltaics
Published on: October 27, 2017
07:28Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor
Published on: August 30, 2012