Related Experiment Video
Updated: Apr 27, 2026
High-speed Particle Image Velocimetry Near Surfaces
Published on: June 24, 2013
Application of an imaging plate system to the direct measurement of a fixed surface contamination
Masahiro Hirota1, Keiji Kimura, Rumi Sato
1*Research Center for Human and Environmental Sciences, Shinshu University, Matsumoto, Nagano 390-8621, Japan; †School of Engineering, The University of Tokyo, Bunkyo, Tokyo 113-0021, Japan; ‡Division for Environment, Health and Safety, The University of Tokyo, Bunkyo, Tokyo 113-8654, Japan; §Radioisotope Center, The University of Tokyo, Bunkyo, Tokyo 113-0021, Japan; **School of Science and Technology, Meiji University, Tama, Kawasaki, Kanagawa 214-8571, Japan.
Abstract:
An imaging plate (IP) system was used as an effective detector for direct measurement of radioactive surface contamination. The IP system displayed images designating the locations and extent of fixed surface contamination of uranyl acetate. The amount of radioactive waste produced during decontamination was reduced because the contaminated spots could be isolated; furthermore, creation of radioactive dust during removal of contamination was prevented because the contaminated spots could be removed without being pulverized. The images were used in efficiently and safely isolating the location of fixed surface contamination. The IP system surface contamination detection limit for uranyl acetate was 2.5 × 10 Bq cm, a value much lower than the surface contamination limit and the clearance level.
